
Blocked drains in Wishart
Roots, removable build-up and pipe defects are possible causes of a blockage. We clear blocked drains and inspect accessible sections where useful, rather than assuming the cause from the garden or suburb.
An area we serve
In August 2026 we replaced a failed heat pump at a Wishart home with a Rheem 315 L electric system. The homeowner had lost hot water and the circuit breaker kept tripping. Here's what we found, how we completed the replacement and what to consider if your own system needs attention.
5.0 from 19 Google reviewsCall, let us know the problem, and we'll confirm availability and agree on an arrival window. We assess on site and give you an upfront fixed price to approve before work starts. If more investigation is needed, we explain the options and any diagnostic cost first. Read how our upfront quotes work.
The homeowner had no hot water, and the hot water circuit breaker kept tripping. We found corrosion and a leak around the heat-exchanger housing of the existing 280 L heat pump, with water reaching electrical components. It couldn't be reliably repaired.
We talked through replacement options, including other brands and solar, and recommended a Rheem 315 L electric storage system for this household. Once the customer approved, we:
Read the full job write-up with photos and video: replacing a failed heat pump with a Rheem 315 L electric system in Wishart.
In our experience, hot water systems commonly need replacing at around 10 to 15 years, depending on the quality of the unit, the water and how well it's been maintained. Reasons to have the system assessed include:
These symptoms can also involve a valve, water pressure, a component fault or another repairable issue. A constantly dripping relief valve alone does not establish that the cylinder has failed. We investigate before recommending replacement.
Like-for-like or a different type? Replacing with the same type is usually simplest. Changing type, for example from a heat pump to electric storage as in the job above, or from electric to gas, can change the installation work and the price. We explain the options before you choose.
What's included when you replace? We check the existing temperature-control arrangement and connecting pipework. Replacement work, including a like-for-like swap, needs compliant control of bathroom delivery temperatures. Any required changes are included in the scope and fixed price before you approve the work.

Roots, removable build-up and pipe defects are possible causes of a blockage. We clear blocked drains and inspect accessible sections where useful, rather than assuming the cause from the garden or suburb.

We repair, replace and upgrade hot water systems: electric, gas and heat pump. See our guide to heat pump hot water in Brisbane and Logan.

We assess burst or leaking pipes, explain the repair needed and give you an upfront fixed price to approve before work starts.

We assess dripping taps, stiff handles and leaking mixers, then explain repair or replacement options and the agreed price.

We assess running toilets, leaks and flushing faults, then explain repair or replacement options before you approve the work.

Tell us the maintenance or repair work you need. We assess it on site, explain your options and quote the work you choose.
It depends on your household size, energy costs, roof space for solar, and where the unit sits. We explain the options and running considerations, then price the one you choose.
Timing depends on the system, access, stock and any electrical or gas work needed. We explain the expected installation arrangements when we quote and confirm the booking before work starts.
Wishart is in Brisbane, so water and sewerage are supplied by Urban Utilities, not Logan Water.
We also work in the suburbs around Wishart.